Articles In This Series
Part 1: Series Introduction, Plus Ranks & Insignia
Part 2: Summer Tunics & Trousers
Part 3: Basing Tips & Tricks
Part 4: Winter Uniforms
Part 5: Painting Guides
Part 6A: Finished Black Tree Design 28mm Infantry
Part 6B: Finished Black Tree Design 28mm Infantry
Part 6C: Finished Black Tree Design 28mm Infantry
This is the final installment in this series of articles on painting 28mm Soviet WWII miniatures. I've enjoyed writing the articles for this project, and by the looks of it if many of you guys also have enjoyed the project. A big thank you to everyone! I have more articles I'd like to post, such as one dealing with good Soviet WWII reference books and using paper building models for urban WWII fighting, but they will be stand-alones. Always something to blog about! Now I just need to find time and motivation. :-)
Two Photos Below: So here are the last of the painted miniatures. These are the helmeted soldiers. While I like the Black Tree Design miniatures, I wish they had more guys wearing medals. The Soviets loved giving out medals. The NCO in the center is wearing a medal for the Battle of Stalingrad. I'll add a bit more scenery material to some of the bases, but I'm going to take Margard's suggestion and not clutter them up.
Photo Below: Here are figures I'm still working on. I have some officers to finish, a scene with guys eating food, some snipers, and a prone LMG crew. As for unprimed miniatures, I have a pack of dismounted tank crew, two Maxim machine gun crews, and a pack of anti-tank rifles. I would also like some female soldiers, but I don't know of anyone doing these in 28mm. I had been a bit exhausted working on this project, but am getting ready to go back and work on it again.
Tuesday, October 30, 2012
Monday, October 29, 2012
Painting WWII Soviet Infantry - Part 6B:
Finished Black Tree Design 28mm Infantry
Articles In This Series
Part 1: Series Introduction, Plus Ranks & Insignia
Part 2: Summer Tunics & Trousers
Part 3: Basing Tips & Tricks
Part 4: Winter Uniforms
Part 5: Painting Guides
Part 6A: Finished Black Tree Design 28mm Infantry
Part 6B: Finished Black Tree Design 28mm Infantry
Part 6C: Finished Black Tree Design 28mm Infantry
Eight of the Black Tree Design figures I have are wearing the fur hat known at a ushanka. While these hats can come in various shades of browns, greens, greys, and black, I made them all the same color to give them some unity. The NCO is wearing a grey hat to distinguish him from the others. To separate some of the same poses, I painted the top of two figures Reaper Uniform Brown, which had a bad habit of cracking while drying. I also gave the fellow on the far left rear a nice scar on his cheek. The NCO also got a small scar. I'll finish up the pics as soon as possible this week. I wanted to post them last week but got sidetracked with real life, barely having any time on the computer.
Part 1: Series Introduction, Plus Ranks & Insignia
Part 2: Summer Tunics & Trousers
Part 3: Basing Tips & Tricks
Part 4: Winter Uniforms
Part 5: Painting Guides
Part 6A: Finished Black Tree Design 28mm Infantry
Part 6B: Finished Black Tree Design 28mm Infantry
Part 6C: Finished Black Tree Design 28mm Infantry
Eight of the Black Tree Design figures I have are wearing the fur hat known at a ushanka. While these hats can come in various shades of browns, greens, greys, and black, I made them all the same color to give them some unity. The NCO is wearing a grey hat to distinguish him from the others. To separate some of the same poses, I painted the top of two figures Reaper Uniform Brown, which had a bad habit of cracking while drying. I also gave the fellow on the far left rear a nice scar on his cheek. The NCO also got a small scar. I'll finish up the pics as soon as possible this week. I wanted to post them last week but got sidetracked with real life, barely having any time on the computer.
Monday, October 22, 2012
Painting WWII Soviet Infantry - Part 6A:
Finished Black Tree Design 28mm Infantry
Articles In This Series
Part 1: Series Introduction, Plus Ranks & Insignia
Part 2: Summer Tunics & Trousers
Part 3: Basing Tips & Tricks
Part 4: Winter Uniforms
Part 5: Painting Guides
Part 6A: Finished Black Tree Design 28mm Infantry
Part 6B: Finished Black Tree Design 28mm Infantry
Part 6C: Finished Black Tree Design 28mm Infantry
Until now, I've been showing odds and ends photos of these figures in various stages of painting. Finally, we have all of them painted and on pretty much done bases. I still need to buy some more autumn flock and debris, but these guys are good enough to start fighting those dirty fascists!
Photo Above: In the foreground, I have four infantry wearing the cloth pilotka hat. Three of them are wielding the deadly but close-range PPSh-41, with one fellow getting ready to throw his grenade and assault. While some gamers dislike kneeling poses, I like having some of them in my skirmish games. The fellow pointing is quite dramatic, and I like the fellow aiming his rifle.
The two figures in the background are bareheaded, of course, but are the exact same pose. I got seven of this pose from the fellow who sold them to me second-hand! Seven bareheaded guys!?! Agh!!! I tried to make these two guys looks as different as possible, but what can you do other than different colored hair? Oh well. I have the other five figures primed in case I meet someone who wants to learn how to paint. I also used one as a test piece to try out some techniques.
Photo Above: Here you can see the rear of the figures. It shows some of the various pieces of equipment these figure sport. The figures second and fourth from the left in the foreground have a single flap pouch that I want to think is a PPSh-41 ammo drum pouch or a grenade pouch, hard to tell because this pouch is used on different poses regardless of weapon. I just realized the pouch also looks like a medical bag--this might be something I add later on for a medic figure, just paint a red cross in a white circle! Soviet equipment is so confusing and varied that I no longer lose sleep over it.
You can also see the different painting techniques I was trying and learning, such as how to line the the figures--use a black line? a darker shade color? something else? A little touch I really liked was highlighting the boot heels and soles.
Photo Above - From Left to Right: I really like the drama of the first figure on the left. He looks like the hardened soldier. The second fellow has a rather frightened look befitting his new (aka matching and greener) uniform--how many days will he last in the field?
While I could have painted the officer in standard Soviet infantry colors, I decided to paint him in NKVD colors, which fit into the platoon's shot-to-heck back story I was cooking up in my head. He just isn't standing behind the platoon, ready to shoot anyone who even thinks about retreating. No, he has taken over a command, extending his left hand for his men to begin deploying to his left and right in preparation for the assault. Desperate times, you know.
The final fellow has a PPSh-41 with grenade, looking more like he's going to pass it to someone than throw it. His satchel could be a grenade pouch, but if you look at his rear photo you'll see he has no other equipment--no shovel, canteen, ammo pouch--nothing. Sloppy sculpting from one of the itinerant sculptors of the line or has this solider lost all his gear? You be the judge. (I like to think the latter, but suspect its the previous, hence the weak "here's a grenade for you, comrade" pose.)
Until Next Time: The next post will show the remainder of the platoon, so stay tuned. I hope these photos and the series inspire you to give some Soviets a try.
Part 1: Series Introduction, Plus Ranks & Insignia
Part 2: Summer Tunics & Trousers
Part 3: Basing Tips & Tricks
Part 4: Winter Uniforms
Part 5: Painting Guides
Part 6A: Finished Black Tree Design 28mm Infantry
Part 6B: Finished Black Tree Design 28mm Infantry
Part 6C: Finished Black Tree Design 28mm Infantry
Until now, I've been showing odds and ends photos of these figures in various stages of painting. Finally, we have all of them painted and on pretty much done bases. I still need to buy some more autumn flock and debris, but these guys are good enough to start fighting those dirty fascists!
Photo Above: In the foreground, I have four infantry wearing the cloth pilotka hat. Three of them are wielding the deadly but close-range PPSh-41, with one fellow getting ready to throw his grenade and assault. While some gamers dislike kneeling poses, I like having some of them in my skirmish games. The fellow pointing is quite dramatic, and I like the fellow aiming his rifle.
The two figures in the background are bareheaded, of course, but are the exact same pose. I got seven of this pose from the fellow who sold them to me second-hand! Seven bareheaded guys!?! Agh!!! I tried to make these two guys looks as different as possible, but what can you do other than different colored hair? Oh well. I have the other five figures primed in case I meet someone who wants to learn how to paint. I also used one as a test piece to try out some techniques.
Photo Above: Here you can see the rear of the figures. It shows some of the various pieces of equipment these figure sport. The figures second and fourth from the left in the foreground have a single flap pouch that I want to think is a PPSh-41 ammo drum pouch or a grenade pouch, hard to tell because this pouch is used on different poses regardless of weapon. I just realized the pouch also looks like a medical bag--this might be something I add later on for a medic figure, just paint a red cross in a white circle! Soviet equipment is so confusing and varied that I no longer lose sleep over it.
You can also see the different painting techniques I was trying and learning, such as how to line the the figures--use a black line? a darker shade color? something else? A little touch I really liked was highlighting the boot heels and soles.
Photo Above - From Left to Right: I really like the drama of the first figure on the left. He looks like the hardened soldier. The second fellow has a rather frightened look befitting his new (aka matching and greener) uniform--how many days will he last in the field?
While I could have painted the officer in standard Soviet infantry colors, I decided to paint him in NKVD colors, which fit into the platoon's shot-to-heck back story I was cooking up in my head. He just isn't standing behind the platoon, ready to shoot anyone who even thinks about retreating. No, he has taken over a command, extending his left hand for his men to begin deploying to his left and right in preparation for the assault. Desperate times, you know.
The final fellow has a PPSh-41 with grenade, looking more like he's going to pass it to someone than throw it. His satchel could be a grenade pouch, but if you look at his rear photo you'll see he has no other equipment--no shovel, canteen, ammo pouch--nothing. Sloppy sculpting from one of the itinerant sculptors of the line or has this solider lost all his gear? You be the judge. (I like to think the latter, but suspect its the previous, hence the weak "here's a grenade for you, comrade" pose.)
Until Next Time: The next post will show the remainder of the platoon, so stay tuned. I hope these photos and the series inspire you to give some Soviets a try.
Sunday, October 21, 2012
I Got the Fever For Rioting Victorians!
What a weekend. Though I've gotten sick again, I tried to do a little painting, finding that fevers and 28mm don't mix well. Still, I soldiered on! I got out my West Wind rioting Victorians and began working on the white shirts. I had already painted the base coats, using three different craft paint colors for the shirts: Warm White, Antique White, and Vintage White. This gives a bit of variety, though after today I've come to prefer using Warm White and maybe Vintage White, with Antique White being a bit too "buttery," if that makes sense. Anyway, on five of the shirts I painted the shadows using two different light shades of grey (all Polly Scale paints since they come lighter than any other hobby paint). Then I gave up. Shame the shadows faded out in this grab shot. Some of these guys are starting to look a little human finally!
Also, I finally got around to taking good quality photos of my Soviets, Westerns, all all my other figures. So in the coming days, look for lots of miniature photos. I even shot photos of all my stalled projects and some of the lead mountain stuff as well. It was really cathartic for some odd reason. Maybe I'll even slip in some photos of the League HQ Lounge. Of course, I'll need to get permission from The Queen Mum (aka my wife), Gawd Bless, Her!, before I reveal such state secrets. And, I'll have to promise her that I won't tell anyone of the new League Secret HQ being constructed under the North Pole or the Airship Fleet we're building in Dontunnastan. ...oops...
Also, I finally got around to taking good quality photos of my Soviets, Westerns, all all my other figures. So in the coming days, look for lots of miniature photos. I even shot photos of all my stalled projects and some of the lead mountain stuff as well. It was really cathartic for some odd reason. Maybe I'll even slip in some photos of the League HQ Lounge. Of course, I'll need to get permission from The Queen Mum (aka my wife), Gawd Bless, Her!, before I reveal such state secrets. And, I'll have to promise her that I won't tell anyone of the new League Secret HQ being constructed under the North Pole or the Airship Fleet we're building in Dontunnastan. ...oops...
Wednesday, October 10, 2012
"Tears of Steel" Short Film
The 12-minute video below, "Tears of Steel," was made using Blender, a free open source 3D software package. The effects are top notch, along with the story. I was very impressed and enjoyed it. Filmed in Amsterdam, the Netherlands.
Check Blender.org for more info and to download the software and Tears of Steel's website for lots of info about the making of the film, which was crowd-funded. I like the robots, which remind me of robots from Critical Mass Games.
Tuesday, October 9, 2012
Painting WWII Soviet Infantry - Part 5:
Painting Guides
Articles In This Series
Part 1: Series Introduction, Plus Ranks & Insignia
Part 2: Summer Tunics & Trousers
Part 3: Basing Tips & Tricks
Part 4: Winter Uniforms
Part 5: Painting Guides
Part 6A: Finished Black Tree Design 28mm Infantry
Part 6B: Finished Black Tree Design 28mm Infantry
Part 6C: Finished Black Tree Design 28mm Infantry
Series Overview
This is the fifth in an ongoing series of articles documenting the research I have been doing for painting my 28mm Black Tree Design miniatures for 1:1 skirmish gaming. Finding historical information on Soviet uniforms that gamers can use was very difficult, with much of it scattered across various Osprey and other books, along with some websites. I hope folks find this series of articles helpful and might even stir some interest in gaming the Eastern Front. While I painted 28mm miniatures, nearly all this information is useful for all miniature sizes.
I hope you've been enjoying this series of articles and would love to hear your comments. And if you enjoy gaming the Eastern Front in any scale, please include a link to your blog or online photo pages.
One Size Does Not Fit All
While doing the research for painting my Soviets, I came to realize that there was no one correct color of Soviet uniform because of the country's poor quality controls and need for many uniforms quickly. Plus, uniforms quickly faded and changed color once they hit the battlefields. For example, tunics and trousers could range from dark green to light cream, with even some tans and browns tossed in. Equipment also came is many different colors, styles, and materials. It can be quite confusing, as well as very liberating because we needn't worry so much about accuracy as we would when modeling the Western Front.
Since I use 28mm miniatures for 1:1 skirmish games that border on roleplaying games, I wanted my soldiers to have as much individual character as possible and reflect the hard city fighting of Stalingrad and its surroundings. The video game Call of Duty 2 heavily influenced my decision to game Stalingrad.
Some Unity is Important
While I painted the uniforms to reflect the chaotic mishmash look of city fighting, I also wanted them to look like a unified fighting force on the table. Being a modeler all my life, I like to say that we don't model reality but people's idea of what reality is supposed to be. For example, I could have painted the steel helmets and ushanka winter hats all sorts of different colors and shades, which would have been quite realistic for my setting, but I used the hats and helmets to unify the soldiers. This is why I painted all the steel helmets the same shade of green. Same for the ushanka, though I did give a cigar-chomping NCO a grey hat to signify his "special" status.
I begin this post with my own guide I created to paint my figures. I also give you some additional painting guides that you might find useful and more to your liking. Finally, you can also check out the nice WWII painting and camo guides over at Artizan's website.
CPBelt's Soviet Infantry Painting Guide
Here is the comprehensive painting guide I created to paint my infantry so far. It collects the bits from earlier articles and includes a lot of new info. I used Reaper paints because I can get them locally. While I have had some problems with some colors of Reaper paint being too thin or cracking while drying (the Olive triad and Uniform Brown all cracked, along with some others), I really like their Terran Khaki triad. As I paint my remaining figures--such as tankers, snipers, officers, NKVD, sailors, and so on--I'll add that info to this guide.
M35 & M43 Summer Tunics, Trousers, & Pilotka
Unless a soldier was a fresh to the fighting, I often painted the tunic one base color and the trouser a different base color. Often Soviet infantry would take better bits and pieces of uniforms when theirs would wear out. For example, a hardened soldier might have light trousers but a new darker jacket.
Fresh Troops
Highlight: Reaper 9122 Terran Khaki
Base: Reaper 9121 Khaki Shadow
Shade: Folk Art FA449 Olive Green
Veteran Troops
Highlight: Reaper 9123 Khaki Highlight
Base: Reaper 9122 Terran Khaki or Vallejo 988 Khaki
Shade: Reaper 9121 Khaki Shadow
Hardened Troops
Highlight: Reaper 9123 + White
Base: Reaper 9123 Khaki Highlight
Shade: Reaper 9122 Terran Khaki
Poor Quality Conrol Variation
Highlight: Reaper 9127 Uniform Brown + Reaper 9123 Khaki Highlight
Base: Reaper 9127 Uniform Brown
Shade: Americana DA180 Asphaltum
M41 & M43 Winter Uniform
These colors work for both the jacket and trousers.
Highlight: Base + Reaper 9123 Khaki Highlight
Base: Reaper 9162 Driftwood Brown
Shadow (and padding creases): Dark Brown.
Steel Helmet:
Highlight: Base + White
Base: Folk Art FA927 Old Ivy + Folk Art FA449 Olive Green
Shade: Americana DA157 Black Green
Chin Straps: Reaper 9122 Terran Khaki
Ushanka (Fur Hat)
For painting the standard infantry ushanka, you will need the colors below and then follow how I painted the hats. First, I painted the entire ushanka Reaper 9158 Olive Drab and then drybrushed the fur flaps with Reaper 9122 Terrain Khaki and then very lightly drybrushed some Reaper 9123 Khaki Highlight. I then painted the cloth part of the hat using Reaper 9121 Reaper Khaki Shadow, highlighting the edges with Reaper 9122 Terrain Khaki. Finally, I lined the edges of the fur flaps using Reaper 9158 Olive Drab. The last touch is to paint the Soviet stars, touching them up with some black and then simply painting them a shade of bright red, leaving some black along the edge for shading.
Drybrushed: Reaper 9123 Khaki Highlight
Drybrushed: Reaper 9122 Terran Khaki or Vallejo 988 Khaki
Reaper 9121 Khaki Shadow
Reaper 9158 Olive Drab
Blankets
I painted all my blankets using summer tunic colors above. You could also paint them shades of green-grey, maybe a brown, and so on. Again, nothing was standard.
Canvas Gear
This includes cloth grenade satchels, ammo pouches, shovel covers, straps, canteens, backpacks, belts, and anything else made of cloth or cloth webbing. Since there were no real standards, with this equipment coming in all sorts of shades, you can vary the base color as you like, using various khakis and light olive greens. Flap straps could be cloth or leather. I painted buckles a tin color.
Highlight: Reaper 9123 Khaki Highlight
Base: Reaper 9122 Terran Khaki
Shade: Folk Art FA449 Olive Green
Leather Gear
This includes leather belts, straps, and ammo pouches. You really have a wide selection of leather colors to choose from, from reddish leather to brown leather to tan leather. It seems that NCO's and better soldiers got higher quality black leather ammo pouches. From what I can see, belts were never black leather. Below are the three leather variations I used on my figures.
Base v1: Vallejo 940 Saddle Brown
Base v2: Reaper 9030 Leather Brown
Base v3: Reaper 9031 Tanned Leather
Boots
Any black will do.
M43 Shoulder Boards (Summer & Winter Uniforms)
The M43 saw shoulder boards come into fashion, both for summer and winter uniform. The board itself is darker than the uniform and trimmed in a color specific for that branch of service. Infantry shoulder boards, for example, has raspberry colored piping trimming the edges. The button on top of the board is brass.
Shoulder Board Base: Reaper 9121 Khaki Shadow
Shoulder Board Trim: Americana DA276 Razzle Berry
Grenades
Since Soviets practiced assault tactics, they loved their grenades. Again, these could come in many different shades like the uniforms, but I chose to paint them all the same color.
Base: Reaper 9122 Terran Khaki
Panzer Aces Paint Guide
If I remember correctly, this is a guide I took from one of the Panzer Aces series. It uses all Vallejo paints. Some folks might find it useful.
Summer Tunic, Trousers, & Pilotka
Highlight: Base + 914 Green Ocher + 976 Buff
Base: 879 Green Brown + 882 Middlestone
Shade: Base + 872 Chocolate Brown + 950 Black
Winter Padded Jacket & Trousers
Highlight: Base + 976 Buff
Base: 897 Bronze Green with 913 Yellow Ocher
Shade: Base + 872 Chocolate Brown + 950 Black
Cloth Coat
Highlight: Base + 991 Dark Sea Grey
Base: 866 Grey Green + 872 Chocolate Brown
Shade: Base + 950 Black
Steel Helmet
Highlight: Base with 882 Middlestone
Base: 897 Bronze Green
Shade (washed): 950 Black
Ushanka
Highlight: Base with 986 Deck Tan
Base: 886 Green Grey
Shade (washed): 950 Black
Leather Equipment
Highlight: Base + 981 Orange Brown
Base: 984 Flat Brown + 940 Saddle Brown (varnished gloss)
Shade: Base + 950 Black
Canvas Equipment
Highlight: Base + 976 Buff + 951 White
Base: 917 Beige with 881 Yellow Green
Shade: 872 Chocolate Brown
Boots
Highlight: 950 Black + 872 Chocolate Brown
Base: 950 Black (varnished gloss)
Shade: 950 Black
Vallejo Soviet Paint Set
The basic guide below is from Vallejo's Soviet boxed paint set and is for the M43 summer uniform.
Helmet
894 Russian Green or 823 Luftwaffe Camo Green
Greatcoats & Bedrolls
874 USA Tan Earth
SMG Ammo Pouches
983 Flat Earth
Uniform
880 Khaki Grey or 988 Khaki
Boots
950 Black
Part 1: Series Introduction, Plus Ranks & Insignia
Part 2: Summer Tunics & Trousers
Part 3: Basing Tips & Tricks
Part 4: Winter Uniforms
Part 5: Painting Guides
Part 6A: Finished Black Tree Design 28mm Infantry
Part 6B: Finished Black Tree Design 28mm Infantry
Part 6C: Finished Black Tree Design 28mm Infantry
Series Overview
This is the fifth in an ongoing series of articles documenting the research I have been doing for painting my 28mm Black Tree Design miniatures for 1:1 skirmish gaming. Finding historical information on Soviet uniforms that gamers can use was very difficult, with much of it scattered across various Osprey and other books, along with some websites. I hope folks find this series of articles helpful and might even stir some interest in gaming the Eastern Front. While I painted 28mm miniatures, nearly all this information is useful for all miniature sizes.
I hope you've been enjoying this series of articles and would love to hear your comments. And if you enjoy gaming the Eastern Front in any scale, please include a link to your blog or online photo pages.
One Size Does Not Fit All
Soviets with a lend-lease jeep with a Browning .50 cal. |
Since I use 28mm miniatures for 1:1 skirmish games that border on roleplaying games, I wanted my soldiers to have as much individual character as possible and reflect the hard city fighting of Stalingrad and its surroundings. The video game Call of Duty 2 heavily influenced my decision to game Stalingrad.
Some Unity is Important
While I painted the uniforms to reflect the chaotic mishmash look of city fighting, I also wanted them to look like a unified fighting force on the table. Being a modeler all my life, I like to say that we don't model reality but people's idea of what reality is supposed to be. For example, I could have painted the steel helmets and ushanka winter hats all sorts of different colors and shades, which would have been quite realistic for my setting, but I used the hats and helmets to unify the soldiers. This is why I painted all the steel helmets the same shade of green. Same for the ushanka, though I did give a cigar-chomping NCO a grey hat to signify his "special" status.
I begin this post with my own guide I created to paint my figures. I also give you some additional painting guides that you might find useful and more to your liking. Finally, you can also check out the nice WWII painting and camo guides over at Artizan's website.
CPBelt's Soviet Infantry Painting Guide
Here is the comprehensive painting guide I created to paint my infantry so far. It collects the bits from earlier articles and includes a lot of new info. I used Reaper paints because I can get them locally. While I have had some problems with some colors of Reaper paint being too thin or cracking while drying (the Olive triad and Uniform Brown all cracked, along with some others), I really like their Terran Khaki triad. As I paint my remaining figures--such as tankers, snipers, officers, NKVD, sailors, and so on--I'll add that info to this guide.
M35 & M43 Summer Tunics, Trousers, & Pilotka
Unless a soldier was a fresh to the fighting, I often painted the tunic one base color and the trouser a different base color. Often Soviet infantry would take better bits and pieces of uniforms when theirs would wear out. For example, a hardened soldier might have light trousers but a new darker jacket.
Fresh Troops
Highlight: Reaper 9122 Terran Khaki
Base: Reaper 9121 Khaki Shadow
Shade: Folk Art FA449 Olive Green
Veteran Troops
Highlight: Reaper 9123 Khaki Highlight
Base: Reaper 9122 Terran Khaki or Vallejo 988 Khaki
Shade: Reaper 9121 Khaki Shadow
Hardened Troops
Highlight: Reaper 9123 + White
Base: Reaper 9123 Khaki Highlight
Shade: Reaper 9122 Terran Khaki
Poor Quality Conrol Variation
Highlight: Reaper 9127 Uniform Brown + Reaper 9123 Khaki Highlight
Base: Reaper 9127 Uniform Brown
Shade: Americana DA180 Asphaltum
M41 & M43 Winter Uniform
These colors work for both the jacket and trousers.
Highlight: Base + Reaper 9123 Khaki Highlight
Base: Reaper 9162 Driftwood Brown
Shadow (and padding creases): Dark Brown.
Steel Helmet:
Highlight: Base + White
Base: Folk Art FA927 Old Ivy + Folk Art FA449 Olive Green
Shade: Americana DA157 Black Green
Chin Straps: Reaper 9122 Terran Khaki
Ushanka (Fur Hat)
For painting the standard infantry ushanka, you will need the colors below and then follow how I painted the hats. First, I painted the entire ushanka Reaper 9158 Olive Drab and then drybrushed the fur flaps with Reaper 9122 Terrain Khaki and then very lightly drybrushed some Reaper 9123 Khaki Highlight. I then painted the cloth part of the hat using Reaper 9121 Reaper Khaki Shadow, highlighting the edges with Reaper 9122 Terrain Khaki. Finally, I lined the edges of the fur flaps using Reaper 9158 Olive Drab. The last touch is to paint the Soviet stars, touching them up with some black and then simply painting them a shade of bright red, leaving some black along the edge for shading.
Drybrushed: Reaper 9123 Khaki Highlight
Drybrushed: Reaper 9122 Terran Khaki or Vallejo 988 Khaki
Reaper 9121 Khaki Shadow
Reaper 9158 Olive Drab
Blankets
I painted all my blankets using summer tunic colors above. You could also paint them shades of green-grey, maybe a brown, and so on. Again, nothing was standard.
Canvas Gear
This includes cloth grenade satchels, ammo pouches, shovel covers, straps, canteens, backpacks, belts, and anything else made of cloth or cloth webbing. Since there were no real standards, with this equipment coming in all sorts of shades, you can vary the base color as you like, using various khakis and light olive greens. Flap straps could be cloth or leather. I painted buckles a tin color.
Highlight: Reaper 9123 Khaki Highlight
Base: Reaper 9122 Terran Khaki
Shade: Folk Art FA449 Olive Green
Leather Gear
This includes leather belts, straps, and ammo pouches. You really have a wide selection of leather colors to choose from, from reddish leather to brown leather to tan leather. It seems that NCO's and better soldiers got higher quality black leather ammo pouches. From what I can see, belts were never black leather. Below are the three leather variations I used on my figures.
Base v1: Vallejo 940 Saddle Brown
Base v2: Reaper 9030 Leather Brown
Base v3: Reaper 9031 Tanned Leather
Boots
Any black will do.
M43 Shoulder Boards (Summer & Winter Uniforms)
The M43 saw shoulder boards come into fashion, both for summer and winter uniform. The board itself is darker than the uniform and trimmed in a color specific for that branch of service. Infantry shoulder boards, for example, has raspberry colored piping trimming the edges. The button on top of the board is brass.
Shoulder Board Base: Reaper 9121 Khaki Shadow
Shoulder Board Trim: Americana DA276 Razzle Berry
Grenades
Since Soviets practiced assault tactics, they loved their grenades. Again, these could come in many different shades like the uniforms, but I chose to paint them all the same color.
Base: Reaper 9122 Terran Khaki
Panzer Aces Paint Guide
If I remember correctly, this is a guide I took from one of the Panzer Aces series. It uses all Vallejo paints. Some folks might find it useful.
Summer Tunic, Trousers, & Pilotka
Highlight: Base + 914 Green Ocher + 976 Buff
Base: 879 Green Brown + 882 Middlestone
Shade: Base + 872 Chocolate Brown + 950 Black
Winter Padded Jacket & Trousers
Highlight: Base + 976 Buff
Base: 897 Bronze Green with 913 Yellow Ocher
Shade: Base + 872 Chocolate Brown + 950 Black
Cloth Coat
Highlight: Base + 991 Dark Sea Grey
Base: 866 Grey Green + 872 Chocolate Brown
Shade: Base + 950 Black
Steel Helmet
Highlight: Base with 882 Middlestone
Base: 897 Bronze Green
Shade (washed): 950 Black
Ushanka
Highlight: Base with 986 Deck Tan
Base: 886 Green Grey
Shade (washed): 950 Black
Leather Equipment
Highlight: Base + 981 Orange Brown
Base: 984 Flat Brown + 940 Saddle Brown (varnished gloss)
Shade: Base + 950 Black
Canvas Equipment
Highlight: Base + 976 Buff + 951 White
Base: 917 Beige with 881 Yellow Green
Shade: 872 Chocolate Brown
Boots
Highlight: 950 Black + 872 Chocolate Brown
Base: 950 Black (varnished gloss)
Shade: 950 Black
Vallejo Soviet Paint Set
The basic guide below is from Vallejo's Soviet boxed paint set and is for the M43 summer uniform.
Helmet
894 Russian Green or 823 Luftwaffe Camo Green
Greatcoats & Bedrolls
874 USA Tan Earth
SMG Ammo Pouches
983 Flat Earth
Uniform
880 Khaki Grey or 988 Khaki
Boots
950 Black
Sunday, October 7, 2012
Painting WWII Soviet Infantry - Part 4:
Winter Uniforms
Articles In This Series
Part 1: Series Introduction, Plus Ranks & Insignia
Part 2: Summer Tunics & Trousers
Part 3: Basing Tips & Tricks
Part 4: Winter Uniforms
Part 5: Painting Guides
Part 6A: Finished Black Tree Design 28mm Infantry
Part 6B: Finished Black Tree Design 28mm Infantry
Part 6C: Finished Black Tree Design 28mm Infantry
Series Overview
This is the fourth in an ongoing series of articles documenting the research I have been doing for painting my 28mm Black Tree Design miniatures for 1:1 skirmish gaming. Finding historical information on Soviet uniforms that gamers can use was very difficult, with much of it scattered across various Osprey and other books, along with some websites. I hope folks find this series of articles helpful and might even stir some interest in gaming the Eastern Front. While I painted 28mm miniatures, nearly all this information is useful for all miniature sizes.
The M41 and M43 Winter Uniforms
In earlier articles, I focused on Soviet summer uniforms. Now I turn my attention to the padded winter uniforms, which were designed to withstand the brutal cold of the Eastern Front.
There are two main patterns of padded winter uniforms: the M41 introduced in 1941 and the M43 introduced in 1943. Both patterns feature nearly identical padded trousers, called "vatnie sharovari" in Russian. These are so similar that gamers really needn't worry about the details because on 28mm and smaller miniatures one pair of padded trousers looks just like the next pair to my eyes. However, when we look at the winter uniform's padded jackets, called "telogreika" in Russian, we can spot some significant differences between the M41 and M43 patterns.
The M41 Telogreika
The M1 telogreika has the same large, folded-down collars as the M35 summer tunic pattern, which I discussed in Part 2 of the series. Rank insignia are displayed on these collars, as you can see in the drawing of the uniform to the upper left. As I discuss later in this article, most telogreika-clad Soviet WWII miniatures use the M41 pattern.
The M43 Telogreika
The M43 pattern, on the other hand, eliminated the telogreika's large collar, replacing it with a short upstanding collar buttoned at the top. This follows the same collar design as on the M43 summer tunic. As with the M43 summer tunic, senior NCO's wearing the M43 telogreika were to have shoulder boards displaying their rank insignia. However, photos show that many NCO's chose not to wear any sort of shoulder board on their telogreika. The photo to the right clearly shows the M43 telogreika, though the photo looks like a publicity shot because the uniforms and equipment on these soldiers look practically brand new and way too clean to have seen any fighting. (Soviets in WWII were fond of staging publicity photos, including combat photos.)
Mixing and Matching Jackets and Trousers
Because the telogreika was warmer than summer uniform jackets while still allowing a soldier more freedom of movement, soldiers often wore their telogreika in spring and autumn as well as in winter. You can see this in some photos, with soldiers wearing their telogreika and regular (non-padded) wool or cotton trousers, while other soldiers are wearing the full summer uniform.
In fact, on the cover of Red Army Uniforms of World War II in Colour Photographs (1993), you can see the fellow on the right wearing a telogreika along with the summer uniform trousers. By the way, this is a great book, with each page featuring one or more color photos of reenactors in Soviet uniforms. There is also a section of gear. This book has been a valuable asset for me, but its info can be a bit sketchy at times. You can pick up perfectly fine used copies of the book on Amazon for $20.
The Ushanka
Nothing screams Soviet/Russian winter like the ushanka! The ushanka, which means "ear hat" in Russian, is a distinctive feature of Soviet WWII uniforms and remains popular today. (In fact, my nephew up North likes to wear a rather large ushanka. Of course, we in Central Florida have little use for such a hat. But I digress...) Sometimes you might see this hat called a shapka or chapka, but from what I've read WWII uniform books prefer calling them ushanka. These hats come in many colors, from the same color as the uniforms, to shades of brown, to shades of cream, to shades of grey. The Soviet Star on the front flap could be red or gold, though I prefer red for my miniatures. You can tie the ushanka's ear flaps at the top of the hat, pulling the flaps up, or you can lower the flaps over the ears, tying them under the chin to keep you nice and tosty on those cold Stalingrad nights. Pretty nifty and very Soviet-looking!
28mm Miniatures in Winter Uniforms
On the page WWII 28mm Soviet Infantry, I discuss in detail which miniature companies make soldiers clad in winter uniforms and identify the uniform patterns they wear. (Originally, that page started as part of this article but grew too large!) Still, I'll briefly say that Artizan, Black Tree Design, Crusader, Warlord Games, and West Wind figures all wear the M41 telogreika with large collars. The Assault Group and Victory Force figures wear the M43 telogreika with short collar and shoulder boards. Some figures wear padded trousers, while most others wear regular trousers.
Painting Winter Soviet Uniforms
Information about painting Soviet winter uniforms can be found in Part 5 of the series, Painting Guides, which will be posted in a couple of days. I'll also post it as a page. This is a comprehensive list of guides covering all the uniforms covered to date.
Part 1: Series Introduction, Plus Ranks & Insignia
Part 2: Summer Tunics & Trousers
Part 3: Basing Tips & Tricks
Part 4: Winter Uniforms
Part 5: Painting Guides
Part 6A: Finished Black Tree Design 28mm Infantry
Part 6B: Finished Black Tree Design 28mm Infantry
Part 6C: Finished Black Tree Design 28mm Infantry
Series Overview
This is the fourth in an ongoing series of articles documenting the research I have been doing for painting my 28mm Black Tree Design miniatures for 1:1 skirmish gaming. Finding historical information on Soviet uniforms that gamers can use was very difficult, with much of it scattered across various Osprey and other books, along with some websites. I hope folks find this series of articles helpful and might even stir some interest in gaming the Eastern Front. While I painted 28mm miniatures, nearly all this information is useful for all miniature sizes.
The M41 and M43 Winter Uniforms
In earlier articles, I focused on Soviet summer uniforms. Now I turn my attention to the padded winter uniforms, which were designed to withstand the brutal cold of the Eastern Front.
There are two main patterns of padded winter uniforms: the M41 introduced in 1941 and the M43 introduced in 1943. Both patterns feature nearly identical padded trousers, called "vatnie sharovari" in Russian. These are so similar that gamers really needn't worry about the details because on 28mm and smaller miniatures one pair of padded trousers looks just like the next pair to my eyes. However, when we look at the winter uniform's padded jackets, called "telogreika" in Russian, we can spot some significant differences between the M41 and M43 patterns.
The M41 Telogreika
The M1 telogreika has the same large, folded-down collars as the M35 summer tunic pattern, which I discussed in Part 2 of the series. Rank insignia are displayed on these collars, as you can see in the drawing of the uniform to the upper left. As I discuss later in this article, most telogreika-clad Soviet WWII miniatures use the M41 pattern.
The M43 Telogreika
Mixing and Matching Jackets and Trousers
Because the telogreika was warmer than summer uniform jackets while still allowing a soldier more freedom of movement, soldiers often wore their telogreika in spring and autumn as well as in winter. You can see this in some photos, with soldiers wearing their telogreika and regular (non-padded) wool or cotton trousers, while other soldiers are wearing the full summer uniform.
In fact, on the cover of Red Army Uniforms of World War II in Colour Photographs (1993), you can see the fellow on the right wearing a telogreika along with the summer uniform trousers. By the way, this is a great book, with each page featuring one or more color photos of reenactors in Soviet uniforms. There is also a section of gear. This book has been a valuable asset for me, but its info can be a bit sketchy at times. You can pick up perfectly fine used copies of the book on Amazon for $20.
The Ushanka
Nothing screams Soviet/Russian winter like the ushanka! The ushanka, which means "ear hat" in Russian, is a distinctive feature of Soviet WWII uniforms and remains popular today. (In fact, my nephew up North likes to wear a rather large ushanka. Of course, we in Central Florida have little use for such a hat. But I digress...) Sometimes you might see this hat called a shapka or chapka, but from what I've read WWII uniform books prefer calling them ushanka. These hats come in many colors, from the same color as the uniforms, to shades of brown, to shades of cream, to shades of grey. The Soviet Star on the front flap could be red or gold, though I prefer red for my miniatures. You can tie the ushanka's ear flaps at the top of the hat, pulling the flaps up, or you can lower the flaps over the ears, tying them under the chin to keep you nice and tosty on those cold Stalingrad nights. Pretty nifty and very Soviet-looking!
28mm Miniatures in Winter Uniforms
On the page WWII 28mm Soviet Infantry, I discuss in detail which miniature companies make soldiers clad in winter uniforms and identify the uniform patterns they wear. (Originally, that page started as part of this article but grew too large!) Still, I'll briefly say that Artizan, Black Tree Design, Crusader, Warlord Games, and West Wind figures all wear the M41 telogreika with large collars. The Assault Group and Victory Force figures wear the M43 telogreika with short collar and shoulder boards. Some figures wear padded trousers, while most others wear regular trousers.
Painting Winter Soviet Uniforms
Information about painting Soviet winter uniforms can be found in Part 5 of the series, Painting Guides, which will be posted in a couple of days. I'll also post it as a page. This is a comprehensive list of guides covering all the uniforms covered to date.
Saturday, October 6, 2012
Peel & Stick Street Details
Bill Mosteller of Great Decals now has peel and stick street details such as sewer drains and manhole covers. For example, each O scale sheet includes 8 manhole covers, 2 grates, 2 covers, and 5 each water and gas cutoff lids. (You get more in the smaller scale sheets.) They're ink-jet printed from color photographs of real hardware by Dick Karnes of Mercer Island, WA.
They come in HO scale for $4.95 postage paid, S scale for $2.95 postage paid, and O scale for $4.95 postage paid. HO will work for 15mm-18mm, while either the S or O scale will work for 28mm figures. Kind of nifty if you're making some streets. I thought I'd mention it in case anyone might find them useful.
They come in HO scale for $4.95 postage paid, S scale for $2.95 postage paid, and O scale for $4.95 postage paid. HO will work for 15mm-18mm, while either the S or O scale will work for 28mm figures. Kind of nifty if you're making some streets. I thought I'd mention it in case anyone might find them useful.
These are the O scale decals. |